ChinaAutoRegs|GB/T 36282
GB/T 36282-2018 英文版/English/翻译
GB/T 36282-2018 英文版/English/翻译/电动汽车用驱动电机系统 电磁兼容性要求和试验方法
Electromagnetic Compatibility Requirements and Test Methods of Drive Motor System for Electric Vehicles
1 SCOPE
This Standard specifies the electromagnetic compatibility requirements and test methods of drive motor system for electric vehicles.
This Standard applies to the drive motor systems for battery electric vehicles, hybrid electric vehicles and fuel cell electric vehicles.
This Standard considers the high voltage (HV) power supply system component as a typical fully-shielded system.
Note: Generally, the EV power supply system consists of two types, i.e. common unshielded low voltage (LV) systems of which the typical structure feature is unshielded, and HV systems of which the typical structure feature is shielded.
2 NORMATIVE REFERENCES
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 18384.3-2015 Electrically propelled road vehicles-Safety specifications-Part 3: Protection of persons against electric shock
GB/T 18655-2010 Vehicles boats and internal combustion engines-Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
GB/T 19951 Road vehicles-Test methods for electrical disturbances from electrostatic discharge
GB/T 21437.2-2008 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
GB/T 29259 Road vehicle-Electromagnetic compatibility terminology
GB/T 33014.1 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 1: General
GB/T 33014.2 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 2: Absorber-lined shielded enclosure
GB/T 33014.4 Road vehicles-Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy-Part 4: Bulk current injection (BCI)
1范围
本标准规定了电动汽车用驱动电机系统电进兼容性要求和试验方法,
本标准适用于纯电动汽车、混合动力电动汽车和燃料电池电动汽车用驵动电机系统.
本标准对于HV(高压)电撕系统部件视为典甩的全屏蔽系统,
迕:电动汽车电渥系统通常分为2种类型:第一种普通LV(低压)系统,其典型结构特点为非屏蔽,第二种HV系统,其典型结构特点为屏蔽.
2规范性引用文件
下列文件对于本文件的应用是必不可少的凡是注日期的引用文件,仅注日期的版本适用于本文 件.凡是不注日期的引用文件,其最新版本(包括所有的修改填)适用于本文件.
GB/T 18384.3—2015电动汽车安全委求第3部分:人员触电防护
GB/T 18655—2010车辆、船和内燃机无线电《扰特性用于保护车栽接收机的限值和测量方法
GB/T 19951道路车辆静电放电产生的电骚扰试验方法
GB/T 21437.2—2008道路车辆由传导和耦合引起的电》扰第2部分:沿电源线的电瞬态传导
GB/T 29259道路车辆电磁兼容术语
GB/T 33014.1进路车辆电气/电子部件对窄带镉射电磁能的抗扰性试验方法 般规定
GB/T 33014.2进路车辆电气/电子部件对窄带箱射电磁能的抗扰性试验方法 波暗室法
GB/T 33014.4道路车辆电气/电子部件对窄带辐射电磁能的抗扰性试驗方法 电流注入(BC1〉法
3术语和定义
GB/T 29259界定的以及下列术语和定义适用于本文件,
受试设备 equipment under test (EUT)
本标准特指电动汽车用驱动电机系统.
低电压 low voltage; LV
对应于GB/T 18384.3—2015规定的A级电压